Select Circuit Mode; Manual Operation - Danfoss C17 Installer's Manual

2

Select circuit mode

During scheduled operation (clock), the state indicator (a
white arrow) will show you the control mode of the selected
circuit.
The mode can be set differently for each circuit by means of
the function selector. However, if manual operation (hand) is
chosen, this mode will apply to all circuits.
Function selector. Push the button to change the
mode of the circuit. The black arrow shows you
which of the modes you have chosen.
What do the symbols mean?

Manual operation

Used only at maintenance and service.
Scheduled operation
This is the normal mode. The temperature is
controlled according to your schedule with
automatic changeover to / from comfort and
saving temperature periods.
Constant comfort temperature
The schedule is not in operation. Use this mode
when a constant comfort temperature is desired.
Constant saving temperature
The schedule is not in operation. Use this mode
when you are away on holiday, etc.
Standby
The circuit is stopped.
The yellow
side of the
ECL Card
State indicator
(white arrow)
Function selector
(black arrow)
2 0