Optional Cleanup - WAGNER POWER MAXROLLER Owner's Manual

Oil-based materials:
These steps should be followed for use with ONLy oil-based materials.
1. Place roller arm and suction tube in a bucket of mineral
spirits.
3. While unit is self-cleaning, thoroughly clean the roller
cover, core and cap with mineral spirits.

Optional Cleanup

2. Turn variable speed dial to 9. FULLy PRESS AND
4. Repeat steps 1-5 in Optional Cleanup - Latex
Steps 1-5 in Optional Cleanup - Latex Materials must be
repeated using warm, soapy water in order to purge any
remaining mineral spirits from the paint hose. Unpurged
mineral spirits can damage the paint hose over time.
11
RELEASE the handle button and recirculate one quart
of mineral spirits through the unit for approximately 10
minutes (cleaning time may vary depending on type of
paint used. Never leave unit running while unattended).
materials using a half gallon of warm, soapy water to
complete the cleaning process.
English
9