HIKVISION network camera User Manual page 67

User Manual of Network Camera
which the video stream is updated and it is measured by frames per second (fps).
A higher frame rate is advantageous when there is movement in the video stream,
as it maintains image quality throughout.
Max. Bitrate:
Set the max. bitrate to 32~16384 Kbps. The higher value corresponds to the higher
video quality, but the higher bandwidth is required.
Note: The maximum limit of the max. bitrate value varies according to different
camera platforms. For some certain cameras, the maximum limit is 8192Kbps or
12288Kbps.
Video Encoding:
If the Stream Type is set to main stream: H.264 and MPEG4 are selectable; if the
stream type is set to sub stream or third stream, H.264, MJPEG, and MPEG4 are
selectable.
Note: The video encoding type varies according to different camera platforms. For
some certain cameras, H.265 is supported while MPEG4 is not.
Profile:
Basic profile, Main Profile and High Profile for coding are selectable.
I Frame Interval:
Set the I-Frame interval to 1~400.
SVC:
Scalable Video Coding is an extension of the H.264/AVC standard. Select OFF /
ON to disable / enable the SVC function. Select Auto, and the device will
automatically extract frames from the original video when the network bandwidth
is insufficient.
Smoothing:
It refers to the smoothness of the stream. The higher value of the smoothing, the
better fluency of the stream, though, the video quality may not be so satisfied. The
lower value of the smoothing, the higher quality of the stream, though it may
appear not fluent.
4. Click Save to save the settings.
67