HIKVISION network camera User Manual page 39

2. Use the PTZ control buttons to move the lens to the desired position.
• Pan the camera to the right or left.
• Tilt the camera up or down.
• Zoom in or out.
• Refocus the lens.
3. Click to finish the setting of the current preset.
4. You can click
Note: Up to 16 presets can be configured for the Network Mini PT Camera.
 Calling a Preset:
This feature enables the camera to point to a specified preset scene manually or when
an event takes place.
For the defined preset, you can call it at any time to the desired preset scene.
In the PTZ control panel, select a defined preset from the list and click
preset.
Or you can place the mouse on the presets interface, and call the preset by typing the
preset No. to call the corresponding presets.
User Manual of Network Camera
Figure 5-4 Setting a Preset
to delete the preset.
Figure 5-5 Calling a Preset
to call the
39