2Driver Board (Sdf) (At Non Usb Ver.) - Oki MICROLINE 320 Turbo Maintenance Manual

3.3.12.2 Driver Board (SDF) (at non USB Ver.)
(1) Remove the upper cover (see 3.3.4 (1) – (5)).
(2) Remove two screws 1, and release the driver board 2 and PCB sheet 5 by lifting clamp
4.
Disconnect all cables from driver board 2.
(3)
(4) To install, follow the removal steps in the reverse order.
Note on installation:
(1) Insert one sensor lever 3 between sensor when installing the driver board 2.
5
1
42089201TH Rev.4
4
2
2
1
2
4
3
Oki Data CONFIDENTIAL
Sensor
3
66 /