Change Lever And Gears - Oki MICROLINE 320 Turbo Maintenance Manual

3.3.17 Change Lever and Gears

(1) Remove the upper cover (see 3.3.4 (1) – (5)).
(2) Remove the reset spring
gear .
5
(3) Push back the protrusion of the Change Gear Shaft
remove the change lever
(4) To perform mounting, follow the reverse procedure of removal.
Remark on assembly:
(1) To insert the change lever into the Change Gear Shaft
42089201TH Rev.4
, then remove the idle gear
1
.
3
4
6
3
, the tractor gear
2
with a flatblade screw driver to
6
, match the flat surface (D cut).
6
5
3
2
Oki Data CONFIDENTIAL
and the change
4
1
D cut
71 /