Making White Stripes At The Boundaries Between Colors Inconspicuous (Trapping) - Oki C844 Advanced Manual

6
Change other settings if necessary, and then click [OK].
7
Click [Print] on the [Print] screen.
• For Mac PS Printer Driver (C834/C844/ES8434)
1
Open the file to print.
2
From the [File] menu, select [Print].
3
Select the [Print Options] panel.
4
Select the [Black Overprint] check box in the [Quality 1] tab.
5
Change other settings if necessary, and then click [Print].
• If setting details are not displayed in the print dialog, click [Show Details] at the bottom of the dialog.
Making White Stripes at the Boundaries Between Colors
Inconspicuous (Trapping)
If white or colored stripes appear between overlaid objects, you can use the trapping function
to make it inconspicuous.
• If [Print Mode] is set to [Image] on the Windows PCL printer driver, this functionis not available.
• For Windows PCL Printer Driver
1
Open the file to print.
2
Select [Print] from the [File] menu.
3
Click on [Preferences].
4
On the [Job Options] tab, select [Advanced].
5
Change [Trapping] to [Narrow] or [Wide] according to the range you want to
adjust, and then click [OK].
6
Change other settings if necessary, and then click [OK].
7
Click [Print] on the [Print] screen.
• For Windows PS Printer Driver (C834/C844/ES8434)
1
Open the file to print.
2
Select [Print] from the [File] menu.
3
Click [Preferences].
4
Select the [Job Options] tab.
5
Change [Trapping] to [Narrow] or [Wide] according to the range you want to
adjust.
6
Change other settings if necessary, and then click [OK].
- 44 -
3. Changing the Finish