Routing - Yamaha DM2000V2 Quick Start Manual

DM2000V2 Quick Start Guide
✦

ROUTING

In this section, the Selected Channel can be routed to any of the 8 Buses, to the Stereo Bus and to a Direct Output. Just
press the relevant button to route the channel to the Bus (these buttons are not available for Output Channels). The
[FOLLOW PAN] button ensures that the PAN of the channel will follow through to the Buses. This is particularly use-
ful when using the Buses as stereo Sub-Groups (as on a typical analog console). The Bus assignment is also displayed
in the fluorescent window above the channel faders.
Buses can be routed to Stereo (just like Sub-Groups on an analog console). To do this, press the ROUTING [DIS-
PLAY] button to see the BUS TO ST page. Here Buses 1-8 can be routed, panned and mixed to the Stereo Bus. Use the
cursor keys, data wheel and [ENTER] button to adjust the parameters.
15/28