Channel Pair - Yamaha DM2000V2 Quick Start Manual

DM2000V2 Quick Start Guide

CHANNEL PAIR

If some Stereo input sources are used, such as a Synthesizer or CD player, it could be useful to pair the relevant channels
together. There are two modes for pairing channels, as selected in the [PAIR] menu.
HORIZONTAL
VERTICAL
Horizontal mode allows odd numbered channels to be paired with their adjacent even numbered channel.
Vertical mode allows channels on the top fader layer (1-24) to be paired with the equivalent channel on the layer below
(25-48). In the same way, channels 49-72 can be paired vertically with channels 73-96 respectively, but the Master chan-
nels can only be paired Horizontally.
When channels are paired, they share the same fader level, the same ON, EQ, Gate, Comp, Aux settings. Pan and Routing
parameters remain separate.
1
To quickly pair channels without using the LCD screen, first hold down the
2
[SEL] button for the Left channel, then also hold down the [SEL] button for
the Right channel (or vice versa) for half a second. This only works in Hori-
zontal Pair Mode.
1 2
17/28