Graphic Equalizers - Yamaha DM2000V2 Quick Start Manual

DM2000V2 Quick Start Guide

GRAPHIC EQUALIZERS

DM2000 provides 6 Graphic Equalizers for use with any Bus, Aux, Matrix or Stereo Master channel. To access the GEQ
functions, press the [GRAPHIC EQUALIZERS] button in the EFFECTS/PLUG-INS section and then select one of the 6
GEQs by pressing one of the numbered buttons below.
Move the cursor to the INSERT area of the page, and press [ENTER] to select which channel to insert the GEQ into. The
GEQ is always inserted post fader, and is separate from the standard insert point which can be used for internal (or exter-
nal) Effects.
INSERT
The channel faders can be used to edit the GEQ bands by moving the cursor onto one of the FADER ASSIGN buttons,
and pressing [ENTER].
FADER ASSIGN
The fluorescent display above the channel faders indicates which frequency is being adjusted by each fader, and while a
fader is being adjusted, the gain value is displayed. When the page shown on the LCD is changed, the channel faders will
return to their normal function so mixing can continue.
NOTE:
The GEQs can only be edited on the faders while the GEQ EDIT page is displayed.
22/28