Getting Started With A 'Blank' Desk; Understanding The Rear Panel - Yamaha DM2000V2 Quick Start Manual

Getting Started with a 'blank' desk

To erase all memories in the desk and return it to its factory settings, hold the SCENE MEMORY [STORE] button
while turning on the power. (You don't need to do this if you have just unpacked the product from its box for the first
time)!
To start from blank settings without erasing the memories, just recall SCENE 00. To do this, use the SCENE MEMORY
Up-Arrow/Down-Arrow buttons to select Scene '00' and then press [RECALL].
All the faders will then move down and all the mixing functions set to their default status.

Understanding the Rear Panel

All the audio connectors are on the rear panel. They include:
Other connectors on the rear panel are for various control and sync functions. For example, the CONTROL port (25-
pin D-sub) is for GPI inputs and outputs. The CASCADE IN and OUT ports are for connecting with other DM2000 or
02R96 consoles to share audio buses. The METER connector is for the optional Meter Bridge.
Various analog Stereo, Studio
and Control Room outputs
8 'OMNI' analog
outputs with TRS
Jacks
24 Mic/Line inputs with XLR and TRS
Jack inputs, and TRS inserts (balanced)
3x 2-Track Digital Inputs
and Outputs
3/28
DM2000V2 Quick Start Guide
6 option slots for
expansion