Control Elements - Waeco PerfectCharge IU152A Installation And Operating Manual

PerfectCharge
Three control lamps on the device are for constant monitoring of the IU0U au-
tomatic charger (see chapter "Functional check" on page 49).
6.2 Specifications for the device variants
Various PerfectCharge IU0U automatic charger versions are available.
Your IU0U automatic charger can be used to charge batteries up to a speci-
fied battery capacity (see chapter "Technical data" on page 52):
IU152A: suitable for charging one supply battery and one starter battery
IU154A, IU252A: suitable for charging up to two supply batteries and one
starter battery
IU254A, IU452A: suitable for charging up to three supply batteries.
For the identification of your device, see the item number on the type plate.
6.3

Control elements

Front view (fig. 2, page 3)
No. Description
1 Main switch
0/Off: device is switched off
I/On: device is switched on
II/Sleep Mode: device runs quietly
(sleep mode: half power)
2 Status LEDs: show the current charging status
(see chapter "Charging characteristics" on page 47)
U Phase: the IU0U automatic charger is in the U phase
IU Phase: the IU0U automatic charger is in the U0 phase
I Phase: the IU0U automatic charger is in the I phase
3 Fan
Technical description
39