Technical Description - Waeco PerfectCharge IU152A Installation And Operating Manual

Technical description

The IU0U automatic charger can be used to charge the following types of bat-
teries:
Lead starter batteries
Gel batteries
Fleece batteries (AGM)
Maintenance-free lead batteries
with the capacities and voltages specified in the chapter "Technical data" on
page 52.
Ask your battery retailer for details relating to the maximum capacity of lead
gel batteries.
Caution
e
Batteries with a cell short circuit may not be charged, as explosive
gases may form due to overheating of the battery.
Caution
e
The IU0U automatic charger may never be used to charge other
battery types (e.g. NiCd, NiMH, etc.)!
6 Technical description
6.1 Function
A fuse protects the device from damage if the polarity is reversed. For the
type and rating of the fuse in your device, see chapter "Technical data" on
page 52.
Caution
e
The device's fuse may only be replaced by qualified personnel who
are familiar with the risks involved and the relevant regulations.
Note
I
You can use a temperature sensor (accessory) to protect the bat-
tery from damage from extreme outdoor temperatures. The tem-
perature sensor is attached to the battery and connected to the
IU0U automatic charger. It protects the battery by adjusting the
charging voltage to the temperature of the battery (see chapter
"Charging characteristics" on page 47).
38
PerfectCharge