Waeco PerfectCharge IU152A Installation And Operating Manual
  1. Manuals
  2. Brands
  3. Waeco Manuals
  4. Battery Charger
  5. IU152A
  6. Installation and operating manual

Waeco PerfectCharge IU152A Installation And Operating Manual

Perfectcharge iu0u automatic charger
Hide thumbs Also See for PerfectCharge IU152A:
Table of Contents

Advertisement

Quick Links

See also: Installation and Operating Manual
PerfectCharge
IU152A, IU154A, IU252A, IU254A, IU452A
DE
11 IU0U-Automatiklader
Montage- und Bedienungsanleitung
EN 33 IU0U Automatic Charger
Installation and Operating Manual
FR
54 Chargeur automatique de batteries IU0U
Instructions de montage et de service
ES
77 Cargador automático IU0U
Instrucciones de montaje y de uso
IT
100 Caricabatterie automatico IU0U
Istruzioni di montaggio e d'uso
NL
122 IUOU automatische lader
Montagehandleiding en gebruiks-
aanwijzing
DA 144 IU0U automatisk oplader
Monterings- og betjeningsvejledning
SV
165 IU0U automatisk lader
Monterings- och bruksanvisning
NO 186 IU0U-Automatisk batteriladdare
Monterings- og bruksanvisning
FI
206 IU0U-automaattilaturi
Asennus- ja käyttöohje

Advertisement

Table of Contents
loading

Related Manuals for Waeco PerfectCharge IU152A

Summary of Contents for Waeco PerfectCharge IU152A

  • Page 1 PerfectCharge IU152A, IU154A, IU252A, IU254A, IU452A 11 IU0U-Automatiklader 122 IUOU automatische lader Montage- und Bedienungsanleitung Montagehandleiding en gebruiks- aanwijzing EN 33 IU0U Automatic Charger DA 144 IU0U automatisk oplader Installation and Operating Manual Monterings- og betjeningsvejledning 54 Chargeur automatique de batteries IU0U 165 IU0U automatisk lader Instructions de montage et de service Monterings- och bruksanvisning...
  • Page 2 PerfectCharge...
  • Page 3 PerfectCharge IU152A START BATT + BATT + BATT - 230 V AC INPUT IU154A, IU252A BATT 1+ BATT 2+ BATT 3+ BATT - 230 V AC INPUT IU254A, IU452A BATT 1+ BATT 2+ BATT 3+ BATT - 230 V AC INPUT...
  • Page 4 PerfectCharge 2 3 0 V A IN P U T...
  • Page 5 PerfectCharge...
  • Page 6 PerfectCharge 2 3 0 V A IN P U T IU152A START BATT + BATT + BATT - 230 V AC INPUT 12 V 12 V...
  • Page 7 PerfectCharge IU154A BATT 1+ BATT 2+ BATT 3+ BATT - 230 V AC INPUT 24 V 24 V 24 V IU252A BATT 1+ BATT 2+ BATT 3+ BATT - 230 V AC INPUT 12 V 12 V 12 V...
  • Page 8 PerfectCharge IU254A BATT 1+ BATT 2+ BATT 3+ BATT - 230 V AC INPUT 24 V 24 V 24 V IU452A BATT 1+ BATT 2+ BATT 3+ BATT - 230 V AC INPUT 12 V 12 V 12 V...
  • Page 9 PerfectCharge...

  • Page 10: Table Of Contents

    PerfectCharge Please read this manual carefully before installing and starting up the device, and store it in a safe place. If the device is passed on to another person, this manual must also be handed over with it. Table of contents Notes on using the manual .

  • Page 11: Notes On Using The Manual

    PerfectCharge Notes on using the manual Notes on using the manual Caution! Safety instruction: failure to observe this instruction can cause material damage or personal injury. Caution! Safety instruction: Failure to observe this instruction can cause material damage and impair the function of the device. Caution! Safety instruction relating to a danger from an electrical current or voltage.

  • Page 12: General Safety Instructions

    PerfectCharge General safety instructions General safety instructions The manufacturer will not be held liable for claims for damage resulting from the following: Faulty assembly or connection Damage to the appliance resulting from mechanical influences and excess voltage Alterations to the device without express permission from the manu- facturer Use for purposes other than those described in the operating manual Please observe the following basic safety information when using electrical...
  • Page 13 PerfectCharge General safety instructions Use the IU0U automatic charger only as intended. Charge the battery only in well ventilated rooms. Always disconnect the power supply when working on the de- vice. Store the IU0U automatic charger in a dry and cool place. Maintenance and repair work may only be carried out by quali- fied personnel who are familiar with the risks involved and the relevant regulations.

  • Page 14: Scope Of Delivery

    PerfectCharge Scope of delivery Scope of delivery No. in fig. 1, Designation page 3 Charger Holders (4 pcs) Connection cable (for 230 V -supply) Exhaust adapter Mounting bracket Hexagon socket wrench – Fastening screws (12 pcs) – Operating manual Accessories Designation Item no.

  • Page 15: Technical Description

    PerfectCharge Technical description The IU0U automatic charger can be used to charge the following types of bat- teries: Lead starter batteries Gel batteries Fleece batteries (AGM) Maintenance-free lead batteries with the capacities and voltages specified in the chapter “Technical data” on page 52.

  • Page 16: Control Elements

    PerfectCharge Technical description Three control lamps on the device are for constant monitoring of the IU0U au- tomatic charger (see chapter “Functional check” on page 49). Specifications for the device variants Various PerfectCharge IU0U automatic charger versions are available. Your IU0U automatic charger can be used to charge batteries up to a speci- fied battery capacity (see chapter “Technical data”...

  • Page 17: Fastening The Iu0U Automatic Charger

    PerfectCharge Fastening the IU0U automatic charger Rear view (fig. 3, page 4) Description 230 V power supply connection RC: connection for remote control (accessory) TS: connection for temperature sensor (accessory) Battery connection terminals BATT 1+, BATT 2+, BATT 3+: positive terminal for supply batteries BATT –: negative terminal START BATT + (only IU152A), BATT 1+ (only IU154A, IU252A): posi- tive terminal of the starter battery...

  • Page 18: Connecting The Iu0U Automatic Charger To The Exhaust System

    PerfectCharge Connecting the IU0U automatic charger to the exhaust system Fastening the IU0U automatic charger to the floor Clip two holders on the left bar and two on the lower right bar (fig. 4, page 5). You can move the holders as required. Fasten the IU0U automatic charger by screwing one screw through each hole in the holders.

  • Page 19: Connecting The Iu0U Automatic Charger

    PerfectCharge Connecting the IU0U automatic charger Connecting the IU0U automatic charger Caution The IU0U automatic charger may only be connected by a qualified specialist. The following information is intended for technicians who are famil- iar with the guidelines and safety precautions to be applied. Observe the following safety instructions for the electrical connections: Caution, risk of short circuit Always use sockets which are grounded and secured by resid-...
  • Page 20 PerfectCharge Connecting the IU0U automatic charger Note Loose connections may cause overheating. Tighten the screws on the terminals to a torque of 12 – 13 Nm. Note IU152A: To connect starter batteries, use the special “START BATT +” terminal intended for this purpose. Note IU154A, IU252A: To connect starter batteries, use the special “BATT 1+”...
  • Page 21 PerfectCharge Connecting the IU0U automatic charger Connecting the battery cables to the IU0U automatic charger Note The IU0U automatic charger's connections are suitable for cables with cross-sections of 10 mm² to 25 mm². Fit wire sleeves to the ends of the cables to ensure permanent contact. Connect the positive battery cable to the respective slot: –...

  • Page 22: Using The Iu0U Automatic Charger

    PerfectCharge Using the IU0U automatic charger Connecting the temperature sensor (accessory) The temperature sensor measures the temperature at the battery or around the battery and transfers the data to the IU0U automatic charger. The charg- ing voltages specified in the chapter “Technical data” on page 52 refer to an ambient temperature of 15 °C to 25 °C.
  • Page 23 PerfectCharge Using the IU0U automatic charger 10.1 Setting the IU0U automatic charger (fig. 8, page 7) Charging voltage and time limit Note Ask your battery retailer for details on the charging voltage and time limit required for your batteries. Caution Make sure that the device is never used if DIP switches 1 and 2 or DIP switches 3 and 4 are both at the “ON”...

  • Page 24: Charging Characteristics

    PerfectCharge Using the IU0U automatic charger Setting the duration of the main charging phase: Duration of the main charging phase Switch 3 Area of application 8 hours Wet batteries 16 hours Gel and fleece batteries Setting the charging mode: Charging mode Switch 4 The trickle charge is activated according to the charging current.
  • Page 25 PerfectCharge Using the IU0U automatic charger I Phase The empty battery is charged with a constant current at the beginning of the charging process, until the battery voltage reaches 13.8 V or 27.6 V. The charging current falls slowly when the battery has reached this charging lev- el.
  • Page 26 PerfectCharge Using the IU0U automatic charger Devices with temperature sensors (accessory) The charging voltage is adjusted according to the battery temperature. A temperature sensor can be connected for an optimum charging function. The charging voltage is increased or reduced according to the battery tempera- ture (see diagram): 16/32 V 15/30 V...

  • Page 27: Cleaning And Servicing The Iu0U Automatic Charger

    PerfectCharge Cleaning and servicing the IU0U automatic charger Cleaning and servicing the IU0U auto- matic charger Caution Do not use any sharp or hard objects for cleaning since they may damage the device. Clean the IU0U automatic charger with a damp cloth from time to time. Rectifying faults Caution This chapter is intended for technicians who are familiar with the...

  • Page 28: Guarantee

    PerfectCharge Guarantee Have the battery checked by a specialist, if necessary, or dispose of the battery. The battery discharges itself after a short time if it is not used Use a suitable multimeter to check the voltage of the battery terminals. If the multimeter indicates a voltage below 12 V (12 V battery) or 24 V (24 V battery), the battery is too weak to be able to remain charged.

  • Page 29: Technical Data

    PerfectCharge Technical data Technical data WAECO PerfectCharge IU152A IU252A IU154A Item no.: 2222500001 2222500002 2222500003 Battery connection 1: starter battery starter battery starter battery 13,8 V/1 A 13,8 V/1 A 27,6 V/1 A Battery connection 2: 13,8 – 14,8 V/15 A 13,8 –...
  • Page 30 PerfectCharge Technical data WAECO PerfectCharge IU452A IU254A Item no.: 2222500004 2222500005 Battery connection 1: 13,8 – 14,8 V 27,6 – 29,6 V total max. 45 A for total max. 25 A for Battery connection 2: all three all three Battery connection 3:...
  • Page 31 Dometic WAECO International GmbH Hollefeldstraße 63 · D-48282 Emsdetten ℡ +49 (0) 2572 879-195 · +49 (0) 2572 879-322 Mail: info@waeco.de · Internet: www.waeco.de Europe Overseas + Middle East Dometic Austria GmbH WAECO Italcold SRL WAECO Pacific Pty. Ltd. Neudorferstrasse 108 Via dell’Industria, 4/0...

This manual is also suitable for:

Perfectcharge iu254aPerfectcharge iu252aPerfectcharge iu154aPerfectcharge iu452a

Table of Contents