Still Image - Sony Handycam Digital8 DCR-TRV238E Operating Instructions Manual

Superimposing a still image in
the "Memory Stick" on an image
– MEMORY MIX
Recording superimposed
images on a "Memory Stick" as
a still image
Before operation
Insert a "Memory Stick" is recorded still images
into your camcorder.
(1) Set the POWER switch to MEMORY. Make
sure that the LOCK switch is set to the left
(unlock) position.
(2) Press MEMORY MIX.
The last recorded or last composed image
appears on the lower part of the screen as a
thumbnail image.
(3) Press MEMORY+/– to select the still image
you want to superimpose.
To see the previous image, press MEMORY –.
To see the next image, press MEMORY+.
(4) Turn the SEL/PUSH EXEC dial to select the
desired mode.
The mode changes as follows:
M. CHROM y M. LUMI y C. CHROM
(5) Press the SEL/PUSH EXEC dial.
The still image is superimposed on the
moving picture.
(6) Turn the SEL/PUSH EXEC dial to adjust the
effect.
M. CHROM – The colour (blue) scheme of
the area in the still image
which is to be swapped with
a moving picture
M. LUMI – The colour (bright) scheme
of the area in the still image
which is to be swapped with
a moving picture
C. CHROM – The colour (blue) scheme of
the area in the moving
picture which is to be
swapped with a still image
The fewer bars there are on the screen, the
stronger the effect becomes.
(7) Press PHOTO deeper to start recording.
The image displayed on the screen will be
recorded on a "Memory Stick." Recording is
complete when the bar scroll indicator
disappears.
(1)
(2)
(3)
(4)
y
(5)
(6)
(7)
y
169