Sony Handycam Digital8 DCR-TRV238E Operating Instructions Manual page 113

Dubbing only desired scenes
– Digital program editing
(on tapes)
To stop dubbing during editing
Press x on your camcorder.
To end the Digital program editing
function
Your camcorder stops when the dubbing ends.
Then the display returns to VIDEO EDIT in the
menu settings.
Press MENU to end the Digital program editing
function.
You cannot record on the VCR when:
– The cassette has run out of tape.
– The write-protect tab on the cassette is set to
lock.
– The IR SETUP code is not correct (when IR is
selected).
– The button to cancel recording pause is not
correct (when IR is selected).
NOT READY appears on the LCD screen when:
– The programme to operate Digital program
editing has not been made.
– i.LINK is selected but an i.LINK cable (DV
connecting cable) is not connected.
– The power of the connected VCR is not turned
on (when you set i.LINK).
x
113