Sony Handycam Digital8 DCR-TRV238E Operating Instructions Manual page 29

Recording a picture
When you record in the SP and LP modes on
one tape or you record some scenes in the LP
mode
•The transition between scenes may not be
smooth.
•The playback picture may be distorted or the
time code may not be written properly between
scenes.
Recording data
The recording data (date/time or various settings
when recorded) are not displayed while
recording. However, they are recorded
automatically onto the tape. To display the
recording data, press DATA CODE on the
Remote Commander during playback.
After recording
(1) Set the POWER switch to OFF (CHG).
(2) Close the LCD panel.
(3) Eject the cassette.
(4) Remove the battery pack.
Adjusting the LCD screen
The LCD panel can be opened up to 90 degrees.
The LCD panel moves about 90 degrees to the
viewfinder side and about 180 degrees to the lens
side.
When closing the LCD panel, set it vertically
until it clicks, and swing it into the camcorder
body.
180°
90°
•
•
(1)
(2)
(3)
(4)
29