Sony Handycam Digital8 DCR-TRV238E Operating Instructions Manual page 125

Viewing images recorded on a
tape on your computer (Windows
users only)
Notes
•When you view images on your computer with
the USB connection, the following may occur.
This is not a malfunction:
– The image may fluctuate
– The image may contain noise, etc.
– The image does not appear properly if the TV
colour system used for the image signal
differs to the system used on your camcorder.
•When your camcorder is in the standby mode
with a cassette inserted, it turns off
automatically after three minutes.
•We recommend setting DEMO MODE to OFF
in the menu settings when your camcorder is in
the standby mode, and no cassette is inserted.
•Indicators in the camcorder LCD screen do not
appear on images that are captured into your
computer.
If image data cannot be transferred by the
USB connection
The USB driver has been registered incorrectly as
your computer was connected to your camcorder
before installation of the USB driver was
completed. Reinstall the USB driver following the
procedure on page 118.
If any trouble occurs
Close all running applications, then restart it.
Carry out the following operations after
quitting the application:
– Disconnect the USB cable
– Change the POWER switch setting or set it to
OFF (CHG)
•
•
•
•
125