Table of Contents
Advertisement
INSTALLATION
Table of Contents
SECTIONS
Before Installation
Unpacking the Product
Before opening the product packaging, inspect the packaging seal
condition to assure that product was not accessed or tampered during
delivery. If the packaging seal looks suspicious, contact Belkin Technical
Support and do not use the product.
After removing the packaging seal, please inspect packaging content to
verify that required components included as listed in the Package Contents
of this manual.
After the Belkin Secure KM is removed from its packaging materials,
inspect the four tampering-evident labels to assure that product is
properly sealed. If one or more label is damaged or missing, contact Belkin
Tech Support and do not use that product.
Where to place the Switch:
The enclosure of the Switch is designed for desktop or under-the-desk
mount configurations. An optional Mount Kit (Belkin part number F1D006)
is available for the F1DN104K. Rack-mount brackets are included with the
F1DN108K.
Belkin® Secure 4/8 port KM Switch User Manual
1
2
14
3
4
Consider the following when deciding where to place the Switch:
• Access to the front-panel push buttons is not required, since the
switching can be done through the Seamless Cursor Switching (SCS)
interface.
• The lengths of the cables attached to your keyboard and mouse
• The location of your computers in relation to your console
• The lengths of the cables you use to connect your computers to the
Switch
Warning: Avoid placing cables near fluorescent lights, air-conditioning
equipment, or machines that create electrical noise (e.g., vacuum
cleaners).
5
6
7
Advertisement
Table of Contents
