Table of Contents
Advertisement
Installation
Table of Contents
Section 3 - Installation
Before Installation
Unpacking the Product
Before opening the product sealed packaging inspect the seal condition to
assure that product was not accessed or tampered during delivery. If
packaging seal looks suspicious contact Belkin support team and do not
use the product.
After seal removal inspect packaging content to verify that required
components included. See packaging content list in page 3 above.
After the Belkin Secure Windowing KVM is removed from its packaging
inspect the tampering-evident label to assure that product is properly
sealed. If the label is damaged or missing contact Belkin support and do
not use that product.
Where to locate the Belkin Secure Windowing KVM?
The enclosure of the product is designed for desktop or under the table
configurations. An optional Mount Kit is available.
Product must be located in a secure and well protected environment to
prevent potential attacker access.
If longer set of cables or if a Secure Fiber Extender (RFE) are used, the
Belkin Secure Windowing KVM may be remotely located in a locked down
facility to prevent unauthorized users access.
Consider the following when deciding where to place the Belkin Secure
Windowing KVM:
•
User access to the front panel push-buttons is typically not
required as all user controls available through the mouse and
indications available on screen.
•
Keyboard and mouse cables length. Cables typically may be
extended to a distance of 4.6 meters (15 feet).
Belkin® Secure 4 port Windowing KVM Switch User Manual
SECTIONS
1
2
3
•
Display cable length. Typically may be extended to around 10
meters without video quality degradation (still depends on display
and cables quality and must be tested prior to fixed installation).
•
The location of the computers in relation to the KVM and the
length of available KVM cables (typically 1.8 m)
Note: Due to USB and DVI signal limitations, the KVM cable length cannot
exceed 4.6 m (15 feet) unless an active extender is used.
Warning: Avoid placing cables near fluorescent lights, air-conditioning
equipment, RF equipment or machines that create electrical noise (e.g.,
vacuum cleaners).
18
4
5
6
7
Advertisement
Table of Contents
