Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
Advertisement
Table of Contents
Related Manuals for Belkin F1DN104K
Summary of Contents for Belkin F1DN104K
-
Page 1: User Manual
Belkin® Secure 4/8 port KM Switch User Manual User Manual Models: F1DN104K – Advanced Secure 4-Port Keyboard / Mouse (KM) Switch F1DN108K – Advanced Secure 8-Port Keyboard / Mouse (KM) Switch Document Number 8820-00770 Rev. A00... -
Page 2: Table Of Contents
APPENDIX B – Secure KM Configuration Utility 33-35 Tamper Evident Labels (KMC Loader) Software Active Anti-Tampering System Product Specifications General Information 36-37 Belkin Product Security Vulnerability………………………………………………….38 Section 3 – Installation Before Installation Installation 15-18 Administrator Setup 19-22 Belkin® Secure 4/8 port KM Switch User Manual... -
Page 3: Section 1 – Introduction
The configuration of the Technical Support at 1 (800) 282-2355 . Belkin Secure KM can be done by using the KM presets or by using the easy to use configuration tool. Belkin® Secure 4/8 port KM Switch User Manual... -
Page 4: Section 2 – Overview
Unqualified devices are rejected when connected to high security Belkin KVM products used in the many high security the Belkin Secure KM. Only mouse and keyboard data are passed through. government, defense and military organizations. Below is a summary of... - Page 5 NIAP Protection Profile 2.1 for Peripheral Sharing Devices. Tamper-Proof Hardware All integrated circuits are soldered directly to the printed circuit board to prevent tampering with the components. Belkin® Secure 4/8 port KM Switch User Manual...
-
Page 6: Operational Features
Operational Features Desktop Controller Unit (DCU) Support With the Belkin Secure KM it is possible to connect an optional DCU (sold The Belkin Secure KM was designed with the user in mind for today’s IT separately) device to control your KM Switch from up to 50 feet away, environment. -
Page 7: What Is Seamless Cursor Switching
Table of Contents SECTIONS What is Seamless Cursor Switching? Seamless Cursor Switching (SCS) is implemented in Belkin Secure KMs to enable seamless cursor and keyboard switching between multiple displays. SCS allows administrators to configure any desired multiple display configuration using the same, or different size displays and resolutions. - Page 8 • Red Hat® Linux® Cables • Mac OS® X v.10.6 and higher Belkin highly recommends you use you use Belkin Cable Kits for your product to help ensure superior security and performance. These cables offer the highest quality possible and optimal data transmission.
- Page 9 Standard PS/2 mouse. User Audio Devices USB Mouse console port The Belkin Secure KM is compatible with the following types of user audio The Belkin Secure KM USB mouse console port is compatible with the devices: following types of devices: •...
-
Page 10: Safety Precautions
The wall-mount power supply used with this product should be the model supplied by the manufacturer or an approved equivalent provided by Belkin or an authorized service provider. The use of improper power source will void product warranty (F1DN104K only) - Page 11 OVERVIEW Table of Contents SECTIONS F1DN104K Back Panel Features F1DN104K Front Panel Features Belkin® Secure 4/8 port KM Switch User Manual...
- Page 12 OVERVIEW Table of Contents SECTIONS F1DN108K Back Panel Features F1DN108K Front Panel Features Belkin® Secure 4/8 port KM Switch User Manual...
-
Page 13: Tamper Evident Labels
“VOID” once removed. When opening be permanently disabled and LED will flashing continuously. If a DCU is product packaging inspect the four tampering evident labels. used, the DCU will indicate that the Belkin Secure KM has been tampered with. IMPORTANT NOTICE:... -
Page 14: Product Specifications
3 years Console Mouse Input: (F1DN104K) USB Type A + PS/2 Mini-DIN Dimensions: (F1DN104K) 12.5 (W) x 6.4 (D) x 1.7 (H) - inches 6-pin female connector (F1DN108K) 17.25 (W) x 7.95 (D) x 1.7 (H) - inches Weight: (F1DN104K) 4 lbs. -
Page 15: Section 3 – Installation
(e.g., vacuum inspect the four tampering-evident labels to assure that product is cleaners). properly sealed. If one or more label is damaged or missing, contact Belkin Tech Support and do not use that product. Where to place the Switch: The enclosure of the Switch is designed for desktop or under-the-desk mount configurations. -
Page 16: Installation
3.1 Power on all of the monitors. devices or multimedia extensions are not supported. Only keyboard 3.2 Connect the Belkin Secure KM to the cable DC plug of the 12V 1.5A functions are supported for devices connected to the keyboard ports while external AC/DC power supply (F1DN104K). - Page 17 INSTALLATION Table of Contents SECTIONS Notes: Your computers should recognize the Belkin Secure KM and Port Name Label automatically install the HID USB driver if necessary. The included network-name labels can be placed in the area underneath the port-selector buttons for port identification. Blank labels are also provided.
- Page 18 INSTALLATION Table of Contents SECTIONS INSTALLATION F1DN104K Typical system installation Belkin® Secure 4/8 port KM Switch User Manual...
-
Page 19: Installation
INSTALLATION Table of Contents SECTIONS F1SN104K typical installation with multiple displays per connected PC Belkin® Secure 4/8 port KM Switch User Manual... - Page 20 Note: Additional settings can be accessed through Control, Control, F11, x, x (refer to figures 5 and 6). Once the Belkin Secure KM is connected and powered on, essential operational settings needs to be configured. The loaded configuration will also include the following settings by default: The first and most important setting of the Switch is the monitor All displays are 1920 x 1200 resolution, same size (26”...
- Page 21 INSTALLATION Table of Contents SECTIONS (Figure 4 – Pre-Defined Configuration List - (Figure 5 – Pre-Defined Configuration List - Using CTRL, CTRL, F11, Using CTRL, CTRL, F11, Fx) x, x) Belkin® Secure 4/8 port KM Switch User Manual...
- Page 22 INSTALLATION Table of Contents SECTIONS (Figure 6 – Pre-Defined Configuration List – Applies to 8-Port KM Version Only - Using CTRL, CTRL, F11, x, x) Belkin® Secure 4/8 port KM Switch User Manual...
- Page 23 Driver can be loaded from speed across different displays and computers using the geometry and Belkin website. If internet access is not allowed - contact Belkin to order display settings entered by the administrator.
-
Page 24: Section 4 – Operation
Prevent transition while dragging feature services. Any support inquiries should be directed to The Belkin Secure KM offers a unique feature that further improves support@belkin.com usability – Prevent Transition while Dragging. If the user drags an object on one display (while left mouse key pressed), the cursor would not leave that display. -
Page 25: Section 5 – Troubleshooting
Check that the keyboard you are using is connected properly to the the mains socket. KM Switch. • Check that DC plug is fully inserted into the switch DC jack (F1DN104K) • Check that the USB cable between the KM Switch and the computer is •... - Page 26 • Make sure you are not using a wireless mouse or a mouse with an integrated USB hub or other USB-integrated devices. These are not supported by the switch due to security policy. Belkin® Secure 4/8 port KM Switch User Manual...
-
Page 27: Section 6 – Appendices
The monitors can be deployed in any physical layout. This software also allows removal of unneeded bridges between monitors. Before You Begin Please contact Belkin to order the KM Switch Accessory Kit. This kit includes disc containing files BelkinKMAdminsetup.exe (installs the KMC Creator and KMC Loader),... - Page 28 Product Model – The product model can be found on the back sticker of the KM switch. The Belkin Secure KM can both support two to four computers. Mouse Speed – This is the default mouse speed for all systems.
- Page 29 Note, if certain monitor is set to Portrait orientation, the Native resolution should be entered accordingly. For example, for a monitor with a native screen resolution of 1680x1050 which is used in Portrait please enter resolution of 1050x1680. Belkin® Secure 4/8 port KM Switch User Manual...
-
Page 30: Windows
Primary display is defined as “main display” in the MS “Screen Resolution” dialog. You can see which is defined as your main display by selecting it in the MS dialog. Belkin® Secure 4/8 port KM Switch User Manual... - Page 31 Once the monitors are placed Yellow “bridges” will indicate area in which the mouse “teleport” itself from one monitor to another. Clicking on one of these areas will remove it which will prevent the mouse cursor from “teleporting” through this bridge. Belkin® Secure 4/8 port KM Switch User Manual...
- Page 32 Example 3 - The setup shown below is invalid. There is no interface between the two monitor hence the curser will not move. It is recommended to use the below bottom setup instead which will give similar results. (Valid Setup) Belkin® Secure 4/8 port KM Switch User Manual...
- Page 33 Computers with multi displays Rule #2 – All displays connected to the same PC must be stuck to one another. It is impossible to have distance between two displays connected to the same PC. Belkin® Secure 4/8 port KM Switch User Manual...
-
Page 34: Kmc Creator
Utility (KMC Loader) Software Once the KM Switch is in Administration mode and is connected to the PC: Belkin’s Secure KM Configuration Utility (KMC Loader) allows you to load 1) Run the loading utility (KMC Loader). Wait for five to ten seconds the configured .kmc file (created per the procedure defined in Appendix A... -
Page 35: Kmc Creator
After loading is complete, restart the KM by disconnecting and then reconnecting power. Reconnect the mouse back to the mouse port and the new configuration will apply. Figure 3 – KM Loading Utility capture – File not correct Belkin® Secure 4/8 port KM Switch User Manual... - Page 36 1 of Appendix B. If the utility cannot communicate with KM switch, it will prompt “KM Not Ready” and no communication port will appear. Figure 4 –Communication between KM and utility has been lost Belkin® Secure 4/8 port KM Switch User Manual...
-
Page 37: General Information
Belkin International, Inc. (“Belkin”) warrants to the original purchaser of ELECTROMAGNETIC COMPATIBILITY this Belkin product that the product shall be free of defects in design, We, Belkin International, Inc., of 12045 E. Waterfront Drive, Playa Vista, CA assembly, material, or workmanship. -
Page 38: General Information
SECTIONS What is not covered by this warranty? If Belkin determines, in its sole discretion, that it is impractical to ship the damaged equipment to Belkin, Belkin may designate, in its sole discretion, All above warranties are null and void if the Belkin product is not provided an equipment repair facility to inspect and estimate the cost to repair such to Belkin for inspection upon Belkin’s request at the sole expense of the... - Page 39 GENERAL INFORMATION Table of Contents SECTIONS Reporting Belkin Product Security Vulnerability If you are aware of potential security vulnerability with any Belkin Government product, we encourage contact immediately following email address: gov_security@belkin.com or our technical support line at: 1-800-419-5546 After your communication is received, Belkin Government personnel will contact you to follow up.
-
Page 40: Windows Vista
© 2013 Belkin International, Inc. All rights reserved. All trade names are registered trademarks of respective manufacturers listed. Windows, Windows Vista, Microsoft, and IntelliMouse are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Mac OS and Mac are trademarks of Apple Inc., registered in the U.S. and other countries.