Package Contents Thank you for purchasing this Belkin Secure Audio and Microphone Switch (the Switch). The Switch offers centralized control, and is designed to reduce the possibility of analog cross-talk of the audio signals between computers running at different security levels.
Tamper-evident Tape A holographic security tamper-evident label is placed on the The Belkin Secure Audio and Microphone Switch was designed with enclosure to provide a visual indication if the Switch has been opened the user in mind for today’s VoIP environments. Below is a summary or compromised.
Cables Belkin highly recommends you use Belkin Audio/Mic Cable Kits for your Switch to help ensure superior performance. These cables offer the highest quality possible to ensure optimal signal transmission. One Cable Kit is required per connected computer or IP phone.
oVerVIeW sections table of contents System requirements The Switch is compatible with computers and IP phones. Headsets, Speakers, and Microphones The Switch is compatible with analog headsets, speakers, and microphones. Headset compatibility includes but is not limited to: • Plantronics HW261N with 3.5mm PC Cable Adapter •...
Color Chip Color Chip Color Chip Color Chip please call Belkin Technical Support at (800) 282-2355 . Microphone-Mute button Secure Audio and Microphone 4-Port Switch...
Page 8
oVerVIeW sections table of contents unit display diagram, back View Console dC Power Jack Audio Port Console Port 4 Port 3 Port 2 Port 1 Microphone Audio and Audio and Audio and Audio and Port Microphone Microphone Microphone Microphone Secure Audio and Microphone 4-Port Switch...
Specifications Part No.: F1DN104A Operating Temp: 32° to 104° F (0° to 40° C) Enclosure: Metal enclosure with high-impact Storage Temp: -4° to 140° F (-20° to 60° C) plastic faceplate Humidity: 0-80% RH, non-condensing Power Requirements: 5V DC, 0.5A (minimum) power adapter...
Switch Step 3 Connecting Computers to the Switch Using the Belkin Shielded Audio/Mic Cable Kit, connect the computers to a port on the rear of the Switch. Other devices may be connected with appropriate adapter cables. (Refer to diagram on page 6.)
InSTAllATIon InSTAllATIon sections sections table of contents table of contents Color Code Chip Installation The Switch’s port-selector buttons can be color-coded for easier identification. Refer to the installation instructions below. note: You may have to remove the existing black color chip first. Insert color chip Remove color chip with a standard paperclip...
oPerATIng THe AudIo And MICroPHone SWITCH sections table of contents operation using the Microphone-Mute button Selecting a Computer using Port Selectors The Switch offers a microphone-mute button to shut-off the Now that you have connected your console and computers to the microphone when the Switch is not in use or while handling calls Switch, it is ready for use.
ConforMITY WITH fCC ruleS for Belkin International, Inc. (“Belkin”) warrants to the original purchaser eleCTroMAgneTIC CoMPATIbIlITY of this Belkin product that the product shall be free of defects in We, Belkin International, Inc., of 12045 E. Waterfront Drive, Playa design, assembly, material, or workmanship.
Page 14
What is not covered by this warranty? 2 . Your Belkin Customer Service Representative will then instruct you on how to forward your receipt and Belkin product and how to All above warranties are null and void if the Belkin product is not proceed with your claim.
Page 15
DIRECT, INDIRECT, CONSEQUENTIAL OR MULTIPLE DAMAGES SUCH AS, BUT NOT LIMITED TO, LOST BUSINESS OR PROFITS ARISING OUT OF THE SALE OR USE OF ANY BELKIN PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. This warranty gives you specific legal rights, and you may also have other rights, which may vary from state to state.
Need help?
Do you have a question about the F1DN104a and is the answer not in the manual?
Questions and answers