FUNAI TD6D-M101 Service Manual page 25

How to Verify the Firmware Version
1. Turn the power on.
2. To put the HDD & DVD into HDD mode, press
[HDD] on the remote control unit.
3. To put the HDD & DVD into version display mode,
press [VARIABLE SKIP], [1], [2], and [3] buttons
on the remote control unit in this order within three
seconds. Fig. f appears on the screen.
*1: " ******* " differs depending on the models.
*2: Firmware Version differs depending on the
models, and this indication is one example.
F/W VERSION DISP
MODEL NAME :
DVB-T VERSION :
FE VERSION :
BE VERSION :
TT VERSION :
DV UNIQUE ID :
LD ADJUSTMENT :
DISC ADJUSTMENT :
DEFAULT SETTING : ENTER
EXIT : RETURN
Fig. f Firmware version display
Display
MODEL NAME Model Name
DVB-T
DVB-T Module version
VERSION
FE VERSION Firmware F/E version
BE VERSION Firmware B/E version
TT VERSION Firmware T/T version
DV UNIQUE ID DV Unique ID
LD LD adjustment progress (done: OK/
ADJUSTMENT not done: --)
DISC Factory adjustment progress (done:
ADJUSTMENT OK/not done: --)
4. Press [RETURN/BACK] or [STANDBY-ON] button
to turn off.
Note: Be sure to verify the firmware version.
*******
***.***
***_***_***
*************
********
******** ********
OK
OK
Contents
1-11-2 E3TF0FW