Sharp UP-3301 Service Manual page 16

No Procedure on P.C. side
11 Execute the "02FD.EXE" on the P.C.
*Please close all other applications while using this utility.
12 Set the Communication method by pushing the "Setting" Button.
Push The "OK" Button.
Push the "[POS 3 PC]" Button.
13
And Select the Sending File.
14 Communication starts.
15 The DownLoad is completed.
The initial Window is shown.
Push the "Exit" Button.
4. UTL33.EXE (UP-3301 Series Utility tool)
1. Outline
This specification covers the utility program "UTL33.EXE" for UP-3301
series. The "UTL33.EXE" is a program which runs on the PC DOS
prompt screen, it is connected to the UP-3301 by RS232 (CH2). It has
the following functions: (1) UP-3301 IPL operation; (2) LOGO data
rewrite for built-in printer UP- T80BP; and (3) program rewrite.
2. System requirements
PC and UP-3301 are connected by RS232 (CH2).
No
14 The UP-3301 displays
15 The DownLoad is completed.
The SETTING menu is shown.
16 Execute the " Service Reset " on the UP-3301
3. Functions
The following three functions become available:
(1) UP-3301 program rewrite (IPL)
The UP-3301 program is updated. S-type files or ER01FD type data
files are used for ROM data.
(2) LOGO data rewrite
The LOGO STAMP data for the UP-T80BP is set.
Black-and-white BMP/PCX data is used and the image size is up to
576 x 240 dots.
(3) Program rewrite (IPL)
The UP-T80BP program is updated. S-type files are used for ROM
data.
According to the contents of the file, "UTL33.EXE" automatically
selects the appropriate protocol from the three types described
above. 1
UP-3301US SERVICE PRECAUTION
– 14 –
Procedure on UP-3301 side