Sharp UP-3301 Service Manual page 13

3. POS UTILITY TOOLS
1) OUTLINE
This Specification document
"POSUTILITYTOOL.EXE and "02FD.EXE".
"POSUTILITYTOOL.EXE"and "02FD.EXE" works on Windows 95/98 of
PC and they have the following
Functions by connecting UP-3301 with RS232.
POSUTILITYTOOL.EXE: IPL of UP-3301 Program Object
02FD.EXE: All RAM Data Upload/Download
(PC software tool instead of the current
ER-02FD.)
3) PROCEDURE
3) -1. POS UTILITY
No Procedure on P.C. side
1 Install the "POSUTILITYTOOL.EXE" on the P.C.
6 Connect the P.C. and the UP-3301 (CH2) via RS232. (Fig 1)
describes the explanation about
UP-3301US SERVICE PRECAUTION
2) CONNECTION
PC and UP-3301 are connected by RS232.
Connect the CH2 port of the UP-3301 to the RS-232 interface of the
PC.
PC
D-SUB 9pin - D-SUB 9pin
cable
RS232 Cable Connecting:
[PC]
D-sub 9pin
SD
GND
RD
No Procedure on UP-3301 side
2 Turn OFF the power.
3 Select "IPL Mode".
Set the "IPL Switch" of the UP-3301 to "ON".
4 Turn ON the power.
5 Starting of "IPL Mode".
The UP-3301 displays
"IPL from Serial I/O"
– 11 –
UP-3301
D-sub 9pin
7 7 /RS
4 4 /ER
3 3 SD
1 1 /CD
5 5 GND
2 2 RD
6 6 /DR
8 8 /CS
9 9 /CI