Printer Does Not Print - Lanier AP3200 Operator's Manual

Lanier digital printer operator guide
Table of Contents

Advertisement

Printer Does Not Print

Possible Cause
Is the power on?
Does the On Line indica-
tor stay on?
Does the Error indicator
stay red?
Is the paper set?
Is the selected paper size
correct?
Is the selected paper type
correct?
Can you print a configura-
tion page?
Is the interface cable be-
tween the printer and the
computer connected se-
curely?
Are you using a correct in-
terface cable?
Did you connect the inter-
face cable after turning on
the power switch?
Solutions
If not, confirm that the power cord is securely plugged into the
power outlet and the printer.
Turn on the printer power.
For more information about the settings, see the Setup Guide.
If not, press {On Line} to make it light up.
If so, check the error message on the panel display and take the re-
quired action. ⇒ P.41 "Error & Status Messages on the Operation Panel"
Load paper into the paper tray. ⇒ P.31 "Loading Paper and Other Media"
Set the selected paper size in any of the input trays.
Adjust the paper size dial to match the size and feed direction of
the paper in the paper tray.
Set the selected paper type in any of the input trays.
Adjust the paper type with the operation panel.
If you cannot print a configuration page, it probably indicates
printer malfunction. You should contact your sales or service rep-
resentative.
If you can print a configuration page but cannot get the printer to
print when you issue a print command from the computer, it prob-
ably means there is a problem with the computer.
Also keep it in mind that large, complex data might take long time
for printer process.
Connect the interface cable correctly. If there are any connectors or
screws, confirm they are fastened securely.
For more information about the settings, see the Setup Guide.
The type of interface cable you should use depends on the com-
puter. Be sure to use the correct one. ⇒ P.116 "Specifications"
If the cable is damaged or worn, replace it with a new one.
Connect the interface cable before turning on the power switch.
Printer Does Not Print
57
4

Advertisement

Table of Contents
loading

Table of Contents