Lanier AP3200 Operator's Manual page 65

Lanier digital printer operator guide
Table of Contents

Advertisement

Messages
Low On Toner
Misfeed:{location} Open
Front Cover
No Files Exist
Offline
Printing...
Processing...
Processing... Please Wait
Ready
Remove Misfeed from Du-
plex Unit
Remove Misfeed From Fin-
isher
Remove Misfeed from Mail-
box
Remove Paper From All
Trays
Remove Paper Finisher Tray
Remove Paper from Duplex
Unit
Error & Status Messages on the Operation Panel
Description
The toner bottle is almost
empty.
There is a misfeed in the print-
er.
There is no sample print file
on the printer hard disk.
There is no locked print file on
the printer hard disk.
Printer is offline. The printer
cannot accept or print out da-
ta.
Printing after second the set
with the sort function.
Print data is being processed.
You have tried to print a sam-
ple print or locked print data
while the data is being written
to the printer hard disk.
The printer is ready for print-
ing.
There is a misfeed in AD380
(duplex unit).
There is a misfeed in the fin-
isher.
There is a misfeed in CS370
(mailbox).
All output trays are full.
The finisher tray is full.
There is still paper in AD380
(duplex unit).
Comments
Prepare a new toner bottle. If
the image density is too light,
replace the old toner bottle
with a new one. ⇒ P.75 "Re-
placing the Toner Bottle"
Remove the misfed paper
from {location}. ⇒ P.64 "Re-
moving Misfed Paper"
To confirm whether the sam-
ple print file was sent to the
printer correctly, see P.85
"Sample Print".
To confirm whether the locked
print file was sent to the print-
er correctly, seeP.88 "Locked
Print".
If you want to put the printer
online, press {On Line}.
Wait for a while.
Wait for a while.
Wait until the printer returns
to the ready condition.
Remove the misfed paper
from AD380 (duplex unit). ⇒
P.64 "Removing Misfed Paper"
Remove the misfed paper
from the finisher. ⇒ P.64 "Re-
moving Misfed Paper"
Remove the misfed paper
from CS370 (mailbox). ⇒ P.64
"Removing Misfed Paper"
Remove paper from output
trays.
Remove paper from the finish-
er tray.
Remove paper from AD380
(duplex unit).
4
51

Advertisement

Table of Contents
loading

Table of Contents