Lanier AP3200 Operator's Manual page 59

Messages
No Files Exist
Offline
Paper Setting
Error
Power Off On
14FF
Printing...
Processing...
Processing...
Please Wait
Ready
Release
Tray Locking
Remove Misfeed
from Duplex Unit
Remove Misfeed
from Finisher
Remove Misfeed
from Mailbox
Remove Paper
From All Trays
Remove Paper
Finisher Tray
Error & Status Messages on the Operation Panel
Description
There is no sample print file
on the printer hard disk.
There is no locked print file on
the printer hard disk.
Printer is offline. The printer
cannot accept or print out da-
ta.
The tray specified when send-
ing locked print data to the
printer is not set.
An error with the NV-RAM
has occurred.
Printing after second the set
with the sort function.
Print data is being processed.
You have tried to print a sam-
ple print or locked print data
while the data is being written
to the printer hard disk.
The printer is ready for print-
ing.
The indicated tray is locked.
There is a misfeed in AD380
(duplex unit).
There is a misfeed in the fin-
isher.
There is a misfeed in CS370
(mailbox).
All output trays are full.
The finisher tray is full.
Comments
To confirm whether the sam-
ple print file was sent to the
printer correctly, see P.85
"Sample Print".
To confirm whether the locked
print file was sent to the print-
er correctly, see P.88 "Locked
Print".
If you want to put the printer
online, press {On Line}.
Set the tray correctly.
Turn the printer power off and
on. If the message appears
again, contact your sales or
service representative.
Wait for a while.
Wait for a while.
Wait until the printer returns
to the ready condition.
—
Unlock the indicated tray with
the operation panel. ⇒ P.99
"Job Control Menu"
Remove the misfed paper
from AD380 (duplex unit). ⇒
P.64 "Removing Misfed Paper"
Remove the misfed paper
from the finisher. ⇒ P.64 "Re-
moving Misfed Paper"
Remove the misfed paper
from CS370 (mailbox). ⇒ P.64
"Removing Misfed Paper"
Remove paper from output
trays.
Remove paper from the finish-
er tray.
4
45