Loading Paper In Ps420 (Paper Feed Unit) - Lanier AP3200 Operator's Manual

Loading Paper in PS420
(Paper Feed Unit)
This section describes instructions to
load paper in the optional paper feed
unit PS420. You can load A4 long-edge
feed (Metric version) or 8
long-edge feed (Inch version) size into
PS420.
Note
❒ Load paper of the same size in the
right and left sides of the paper
feed unit.
A
Slide the paper tray out until it
stops.
B
Load the paper completely into
the tray.
❒ Align the paper so that the left
❒ Do not stack paper over the lim-
" × 11"
1
/
2
❒ Confirm that the end fence (A)
❒ If you want to change the paper
❒ To avoid paper multi-feeds,
❒ Load the paper face up into the
C
Slide the tray into the printer un-
til it stops.
ZAEY200E
ZAEY201E
Loading Paper and Other Media
Important
stack is flush with the left side,
and the right stack is flush with
the right side.
it mark.
locks completely after loading
the right stack.
size, contact your sales or ser-
vice representative.
Note
shuffle sheets before setting
them in the tray.
tray.
3
35