Lanier AP3200 Operator's Manual page 56

Troubleshooting
Messages
Energy Saver 2
Error 1
Error 2
Error 3
4
Error 5
Error 6
Error 7
Error 15
Error 30711
Error 30721
Error 30722
Error 30723
42
Description
In Energy Saver 2 mode.
An error with the optional
RAM has occurred.
An error with the parallel in-
terface board has occurred.
An error with the NV-RAM
has occurred.
An error with the HDD has oc-
curred.
An error with the Resident
font ROM has occurred.
An error with the ASIC has oc-
curred.
An error with the Clock Gen-
erator has occurred.
AD380 (duplex unit) cannot be
used.
PS420 (paper feed unit) cannot
be used.
Tray 1 cannot be used.
Tray 2 cannot be used.
Comments
Press an operation panel key
or send a job from the comput-
er to wake the printer up.
Turn the printer power off and
on. If the message appears
again, contact your sales or
service representative.
Turn the printer power off and
on. If the message appears
again, contact your sales or
service representative.
Turn the printer power off and
on. If the message appears
again, contact your sales or
service representative.
Install the HDD again. If the
message appears again, con-
tact your sales or service rep-
resentative.
Turn the printer power off and
on. If the message appears
again, contact your sales or
service representative.
Turn the printer power off and
on. If the message appears
again, contact your sales or
service representative.
Turn the printer power off and
on. If the message appears
again, contact your sales or
service representative.
Use another tray to print. Con-
tact your sales or service rep-
resentative.
Use another tray to print. Con-
tact your sales or service rep-
resentative.
Use another tray to print. Con-
tact your sales or service rep-
resentative.
Use another tray to print. Con-
tact your sales or service rep-
resentative.