Form Feed - Lanier AP3200 Operator's Manual

Troubleshooting
Messages
Load Bypass
xx
4
Load Tray #
xx
Load ***
XX
Lock Tray
Tray #
Low On Toner
Misfeed:{location}
Open Front Cover
44
Description
The bypass tray is out of pa-
per.
xx : Paper Size
The paper size specified with
the printer driver differs from
the paper size specified with
the operation panel.
There is no paper in the indi-
cated tray.
# : Tray Number
xx : Paper Size
There is no paper size of the
indicated paper type.
***: Paper Type (plain, special,
recycled)
XX: Paper Size
The indicated tray is not
locked.
# : Tray Number
The toner bottle is almost
empty.
There is a misfeed in the print-
er.
Comments
Load paper of the indicated
paper size into the bypass
tray.
A Press {Form Feed}.
If there is paper in the bypass
tray, the printer starts print-
ing.
If there is no paper in the by-
pass tray, the following mes-
sage appears on the panel
display. In this case, go to next
step.

Form Feed

Tray 1
B Press {T T T T } or {U U U U } to select
the paper tray and then press
{Enter #}.
The printer starts printing.
Load paper of the indicated
paper size into the indicated
paper tray.
Load paper of the indicated
paper size and paper type into
the tray.
Lock the indicated tray with
the operation panel. ⇒ P.99
"Job Control Menu"
Prepare a new toner bottle. If
the image density is too light,
replace the old toner bottle
with a new one. ⇒ P.75 "Re-
placing the Toner Bottle"
Remove the misfed paper
from {location}. ⇒ P.64 "Re-
moving Misfed Paper"