Lanier LD235 Copy Reference Manual page 88

Troubleshooting
Message
Maximum number of
*.
sets is
Original is being
scanned by another
function.
3
You do not have the
privileges to use
this function.
Authentication has
failed.
The selected
file(s) which you
do not have access
privileges to
could not be de-
leted.
" Updating the des-
tination
list...Please
wait. Specified
destination(s) or
sender's name has
been cleared.
pears, and operations are
not possible.
78
Causes
The number of copies ex-
ceeds the maximum copy
quantity.
The Document Server func-
tion is in use.
The use of this function is
restricted to authentified
users only.
The entered login user
name or login password is
not correct.
The machine cannot per-
form authentication.
You have tried to delete
files without the authority
to do so.
The destination list is being
updated from the network
using SmartDeviceMonitor
for Admin. Depending on
the number of destinations
to be updated, there may
be some delay before you
" ap-
can resume operation. Op-
erations are not possible
while this message is dis-
played.
Solutions
You can change the maximum copy
quantity. See p.94 "Max. Copy
Quantity".
To cancel the job in process, press
[Exit], and then press the {Document
Server} key. Next, press the
{Clear/Stop} key. When the message
"
[Stop] key was
pressed.Stop storing?
appears, press [Stop].
Contact the administrator.
Inquire the user administrator for
the correct login user name and
login password.
Contact the administrator.
Files can be deleted by the person
who created the file. To delete a file
which you are not authorized to de-
lete, contact the person who created
the file.
Wait until the message disappears.
Do not switch off the power while
this message is displayed.
"