Table of Contents
Advertisement
Copying
E
Press the [OK] key.
F
Adjust the paper guides to the paper size.
2
1.
Horizontal size
2.
Vertical size
3.
Extender
4.
Paper guides
Note
Make sure the paper size and direction in the bypass tray is displayed on
the operation panel.
Make sure that the paper guides match the paper size. If the paper guides
are not adjusted to the paper size properly, paper might be skewed or pa-
per misfeed might occur.
With large copy paper (more than A4L, 8
tender.
G
With the side you wish to copy onto face up, insert the paper into the by-
pass tray until it stops.
H
Set your originals, then press the {Start} key.
Copying onto non-standard size paper with the bypass tray
Preparation
You can register non-standard paper sizes you use often in keys [Custom1],
[Custom2], and [Custom3] with the user tools.
Note
Be sure to set the paper size or a paper misfeed might occur.
A
Open the baypass tray.
44
1
/
"
11"L), swing out the ex-
2
P.131 "System settings".
Advertisement
Table of Contents
