If You Cannot Make Copies As You Want - Lanier 5625 Operator's Manual

If You Cannot Make Copies as You Want

Problem
Copies appear dirty.
The reverse side of an orig-
inal image is copied.
A shadow is copied when
copying a pasted original.
Copies are too light.
Cause
The image density is too
dark.
The exposure glass or doc-
ument feeder belt is dirty.
The image density is too
dark.
The image density is too
dark.
The original has a low con-
trast image.
The image density is too
light.
Damp or rough grain pa-
per is used
If You Cannot Make Copies as You Want
Action
Adjust the image density.
P.28 "Adjusting Copy Im-
age Density".
Adjust the background
density. P.98 "Image Ad-
justment".
Clean them. P.149
"Maintaining Your Ma-
chine"
Adjust the image density.
P.28 "Adjusting Copy Im-
age Density".
If you select Black Copy
mode or Single Color
mode, place a black sheet
of paper under the reverse
side of the original and se-
lect Auto Image Density
mode.
Lighten the background
density. P.98 "Image Ad-
justment".
Adjust the image density.
P.28 "Adjusting Copy Im-
age Density".
Adjust the background
density. P.98 "Image Ad-
justment".
Set the original in a differ-
ent direction.
Put mending tape on the
bound part.
Adjust the image density.
P.28 "Adjusting Copy Im-
age Density".
Use dry paper without
rough grain.
5
111