Lanier 5625 Operator's Manual page 145

Menu
Tray Priority
Auto Tray Switch
Interleave Print
Output Tray Prio. (For 3-
bin sorter only)
Display Contrast
Description
You can select the paper tray which will be selected as a
default in the following conditions:
• When the main power switch or operation switch is
turned on.
• When System Reset or Auto Reset mode is turned on.
• When the {Clear Modes} key is pressed.
Note
Default: Tray 1
Tray 2, Tray 3, and Tray 4 are options.
If you load paper of the same size in two or more trays,
the machine automatically shifts another tray when the
tray in use runs out of paper. You can set or cancel this
setting.
Note
Default: Off
In this settings On, a print job can interrupt a copy job
and vice versa.
Note
Default: On
You can specify a bin to which documents are delivered
for each feature (copy and printer).
Select [Copy] or [Printer] with the <> keys. Then
A
press the [OK] key.
Select a bin with the <> keys. Then press the [OK]
B
key.
Note
Default:
• Copy: First bin
• Printer: First bin
You can adjust the brightness of the panel display.
Note
Default: level 4
User Tools
6
133