Setting Non-Standard Size Originals - Lanier 5625 Operator's Manual

Basics

Setting Non-standard Size Originals

When copying from non-standard size originals, enter the original size so that
copy is well aligned.
1
Limitation
You must set your non-standard size originals on the exposure glass.
Reference
For the standard sizes the machine can detect,
nals".
Note
The dimensions you can enter must be within the following ranges:
Vertical size
Horizontal size
A
Select the copy paper size.
B
Press the {Menu} key.
C
Make sure that the [Custom Size Orig.] is selected, then press the [Select] key.
24
50 - 297mm (in 1mm steps), 2.0" - 11.7" (in 0.1" steps)
50 - 432mm (in 1mm steps), 2.0" - 17" (in 0.1" steps)
P.16 "Standard Size Origi-