Lanier 5625 Operator's Manual page 150

Changing the Machine's Settings
Menu
Margin Adjustment
Set User Ratio
6
Initial Mode Set
Key Operator Tools
Use these tools to manage use of the machine.
Note
Enter a previously registered key operator code with the number keys.
Reference
For details
138
Description
You can adjust the margin width that is selected as a de-
fault in Margin Adjust mode. You can change this setting
as follows:
Select the margin direction with the <> keys.
A
B
Enter the margin width with the number keys. Then
press the [OK] key.
Metric version: left/20mm - right/20mm in 1mm
steps
Inch version: left/0.8" - right/0.8" in 0.1" steps
Note
Default:
• Metric version: left/10mm
• Inch version: left/0.4"
Up to 2 reproduction ratios which you frequently use
can be registered.
Select [Ratio1] or [Ratio 2] with the <> keys.
A
B
Enter the ratio with the number keys. Then press the
[OK] key.
Note
Default: 100 %
You can set the machine to recall program setting when
the machine is turned on or when modes are cleared.
Note
Default: Normal
Your service representative can store the program set-
ting.
Your service representative can select whether the
program setting is recalled when the machine is
turned on or when modes are cleared.
P.131 "System settings".