User Tools; Accessing The User Tools - Lanier 5625 Operator's Manual

User Tools

Accessing the User Tools

This section is for the key operators in charge of this machine. You can change
or set the machine's default settings.
Note
Do not forget to exit the user tools menu after accessing it.
A
Press the {User Tools} key.
B
Select [System Settings] or [Copy Features] with the <> keys, then press the
[OK] key.
C
Select the desired user tools menu with the <> keys, then press the [OK]
key.
Note
[ Next]: Press to go to the next page.
User Tools
6
129