Exiting From The User Tools; Settings You Can Change With The User Tools (System Settings) - Lanier 5625 Operator's Manual

Changing the Machine's Settings
[ Prev.]: Press to go back to the previous page.
D
Change the settings by following the instructions on the display. Then
press the [OK] key.
Note
[OK] key: Press to set the new settings and return to the previous menu.
[Cancel] key: Press to return to the previous menu without changing any
data.

Exiting from the User Tools

A
6
After changing the user tools settings, press the {User Tools} key.
Note
The settings are not canceled even if the operation switch is turned off or
the {Clear Modes} key is pressed.

Settings You Can Change with the User Tools (System Settings)

Reference
For how to access the user tools,
130
P.129 "Accessing the User Tools".