Margin Adjustment - Lanier 5625 Operator's Manual

Copying
C
Press the [Exit] key.
D
Select the copy paper size.
E
Set your originals, then press the {Start} key.

Margin Adjustment

2
You can make a margin by shifting the image to the left or right. This function is
convenient when you want to bind copies.
Note
You can change the width of the binding margin as follows.
Metric Version
Inch Version
The margin width default is as follows. You can change this default setting
with the user tools.
Metric Version
Inch Version
If you set too wide a margin, areas you do not want to delete might be erased.
Reference
Regarding function that cannot be used together with this function,
"Combination Chart".
68
0 - 20mm (in 1mm steps)
0" - 0.8" (in 0.1" steps)
P.136 "General features".
10mm Left
0.4" Left
P.103