Table of Contents
Advertisement
Interfacing with the Camera through a Network Video Recorder
Step 5: Launch the Web Client to View Live Video
Document 800-09312V2 Rev A
08/2012
Performance Series Indoor Day/Night H.264 IP Camera User Guide
Your camera supports the PSIA specification for interoperability between network video
products.
For further information, refer to the documentation supplied with your NVR or contact your
NVR network administrator.
Note
Only four users, any combination of Administrators and Guests, can log on to
the web-client application at a time.
Note
After the IP Utility software is installed for the first time, you can change the
Administrator or Guest passwords and upgrade firmware.
Note
It is important to click Apply in order to save any configuration change.
1.
Log onto the web client. There are two ways to launch the web client and log on—
with the Honeywell IP Utility program or directly from Internet Explorer.
Honeywell IP Utility
a.
Log onto the Honeywell IP Utility program.
b.
From the Discovery pane, select and connect to the device to launch its browser
(see
Connecting to a Device
c.
To enable or disable the HTTP server, select or clear the Enable HTTP Server
check box. By default, the HTTP server is enabled.
d.
From the System tab, click Launch Browser.
The web-client application for the selected device opens in Internet Explorer.
Internet Explorer
From Internet Explorer (v6.0+), enter the URL (IP address of the device) in the
Address bar to open the logon window.
2.
Select a User Name and enter a Password.
a.
From the User Name drop-down list, select admin or Guest.
on page
37
for more information).
41
Hide quick links:
Advertisement
Table of Contents
