Download  Print this page
   

Advertisement

T
o
t
a
l
C
o
n
n
e
c
t
O
n
l
i
n
e
H
e
l
p
G
u
i
d
e
f
o
r
:
T
o
t
a
l
C
o
n
n
e
c
t
O
n
l
i
n
e
H
e
l
p
G
u
i
d
e
f
o
r
:
i
P
C
a
m
e
r
a
s
i
P
C
a
m
e
r
a
s
POWER
NETWORK
iPCAM-PT Pan and Tilt
iPCAM-WI Wireless Indoor
iPCAM-WO Wireless Outdoor
800-08456 3/11 Rev. A

Advertisement

   Also See for Honeywell IPCAM-WO

   Related Manuals for Honeywell IPCAM-WO

   Summary of Contents for Honeywell IPCAM-WO

  • Page 1

    POWER NETWORK iPCAM-PT Pan and Tilt iPCAM-WI Wireless Indoor iPCAM-WO Wireless Outdoor 800-08456 3/11 Rev. A...

  • Page 2

    TRADEMARKS Honeywell is a registered trademark of Honeywell International Inc. Flash is a registered trademark of Adobe Systems Incorporated, registered in the U.S. and other countries. QuickTime® is a registered trademark of Apple Inc., registered in the U.S. and other countries.

  • Page 3: Camera Features

    Cameras Online Help Guide This guide covers the operation of Honeywell's iP Cameras for use with the Total Connect website. The various cameras each have different features that can be controlled from the Total Connect website. When a particular camera is selected, only the operating switches for that model camera will appear.

  • Page 4

    iP Cameras Online Help Guide On the right, thumbnail still pictures for each camera will appear. These thumbnails are updated every 10 to 20 seconds. You may select a camera to view live video by clicking on that camera. The live video appears on the left.

  • Page 5

    iP Cameras Online Help Guide This dedicated camera viewing window provides a larger live video view. The tool buttons available will depend on the iP camera model. For a detailed description of each button's function, refer to the "Tool Buttons" topic that follows. When your session is over, in the video monitoring window click Close then log out of Total Connect.

  • Page 6

    iP Cameras Online Help Guide Tool buttons Button Function How the camera's "Home" position is determined.  If no video detection areas have been set up, the camera's home position is centered in its vertical and horizontal axis.  If a video detection area has been set up, that view now becomes the home position. ...

  • Page 7

    iP Cameras Online Help Guide Edit camera settings Note, that the settings for each camera are configured separately. On each camera preview window there is a Tool icon in the lower right corner, click this icon to bring up the camera's Camera Configuration window. It is important to know that configuration settings are stored in the camera and are retrieved when a video session is opened.

  • Page 8

    iP Cameras Online Help Guide Camera Configuration window This is where you configure the camera. Upon completion, click the SAVE button. A confirmation mes- sage appears. Schedule window This window allows you to setup schedules that define when a motion event can be detected. Schedules may be deleted by clicking the "X"...

  • Page 9: Updating The Camera Firmware

    iP Cameras Online Help Guide Detection Areas window When an area is activated by checking the box, a transparent colored Detection Area will appear on the screen. You can drag and resize the box as desired. Click Done when all the areas are configured. Motion detected in any area will trigger a video event and...

  • Page 10

    2 Corporate Center Drive, Suite 100 P.O. Box 9040 Melville, NY 11747 Copyright  2011 Honeywell International Inc. www.honeywell.com/security Ê800-08456_Š 800-08456 3/11 Rev. A...

This manual also for:

Ipcam-wiIpcam-pt

Comments to this Manuals

Symbols: 0
Latest comments: