Configuring Network Settings
IP Camera Network Configuration
Discovering Devices
Connecting to Devices
26
When you log on to the IP Utility, the devices on the network—including the devices on
other subnets—are automatically discovered and listed in the Discovery pane. After the
initial discovery, auto-refresh continues to discover devices that are newly added or
removed from the network.
You can also manually refresh the device discovery by clicking the Discovery icon (
located near the top of the Discovery pane.
Note
The Multicast protocol needs to be enabled in the LAN (router/switch) to
discover the devices beyond the subnet.
Note
Contact your network administrator if you have any questions regarding your
local area network (LAN) or any other network related issues.
Before configuring the IP network settings, you must connect to the IP device.
To Connect to a Device
•
In the Discovery pane, double-click the device.
OR
•
Select the device and click
displayed in the System pane.
To Disconnect from a Device
•
In the Discovery pane, select the device, and click
Note
When you see the Limited/No connectivity icon (
connect to the device because of network related issues. Check your network
settings to resolve the issue.
. The network settings for the connected device are
.
),
), you cannot fully