Figure 3-2 Honeywell Ip Utility User Interface - Honeywell NTSC User Manual

Installing the Honeywell IP Utility and Web Client
Refresh button
Disconnect button
The Discovery pane lists
the IP devices found on the
network and groups by
device type.
Use Batch Firmware Upgrade
to select a group of devices and
upgrade the firmware for all.
36
Figure 3-2 Honeywell IP Utility User Interface
Connect button
Limited/No connectivity
button
Enable or disable HTTP
Server.
The Status bar displays how many
devices are on the network, which
one you are connected to, and
which user is logged on.
Use the Product Filter drop-down
menu to select a specific device,
such as all HD45IP cameras.
The About menu displays the
software version installed.
From the User tab, Administrators
can change the web-client user
passwords.
IP Network Setting assigns
network settings automatically
or manually.
Upgrade Firmware
downloaded from the
Honeywell web site.
Use Launch Browser
to open the IP web
client for each device.
Click Apply to save
manually configured
network settings.