Securing The Enclosure Cover; Figure 2-7 Installing The Enclosure Cover - Honeywell NTSC User Manual

Securing the Enclosure Cover

Document 800-09312V2 Rev A
08/2012
Performance Series Indoor Day/Night H.264 IP Camera User Guide
Install the dome bubble when you have set up your camera and completed the network
connections (see Chapter 4, IP Camera Web
Place the enclosure cover on the camera with the tabs to the left of the slots, then turn it
clockwise until the tabs click securely into place (see
Figure 2-7 Installing the Enclosure Cover
Client).
Figure 2-7).
27