About The Web Client; User Profiles: Honeywell Ip Utility And Web Client - Honeywell NTSC User Manual

Installing the Honeywell IP Utility and Web Client

About the Web Client

User Profiles: Honeywell IP Utility and Web Client

30
Note You will need a Username and Password to log in to the Download Center. To
receive a Username and Password, contact the customer service center for
your region. Contact information is found on the Download Center page.
Note Before installing and using the Honeywell IP Utility, confirm that your camera
is connected to the network through an Ethernet cable. See
Network with an RJ-45 Ethernet Connector
The web client is the web-based application that enables users to:
• View live-streaming video.
• View the device network settings and firmware details.
• Configure camera settings
• Configure video analytics settings.
• Configure compression settings.
Both the Honeywell IP Utility and the web client have two user types: Administrator and
Guest as described in Table
Note Up to four (4) Administrators and/or guest users can log on at the same time.
3-1.
Connecting to a
on page 23.