Table 17: Registered Parameter Numbers - Classic Organ Works CMK-1 User Manual

Table 17: Registered Parameter Numbers

To set or change the value of a Registered Parameter:
1. Send two Control Change messages using Control Numbers 101 (65H) and 100 (64H) to select the desired Registered Parameter
Number, as per the following table.
2. To set the selected Registered Parameter to a specific value, send Control Change messages to the Data Entry MSB controller
(Control Number 6). If the selected Registered Parameter requires the LSB to be set, send another Control Change message to the
Data Entry LSB controller (Control Number 38).
3. To make a relative adjustment to the selected Registered Parameter's current value, use the Data Increment or Data Decrement
controllers (Control Numbers 96 and 97).
Parameter Number
Decimal Control 101 Value
(MSB)
0 00H = 0
1 00H = 0
2 00H = 0
3 00H = 0
4 00H = 0
5 00H = 0
_________________________________________________________________________________________________________
CMK-1 Manual (Issue-1)
[12]
Parameter
Control 100 Value
(LSB)
00H = 0 Pitch Bend
Sensitivity
01H = 1 Channel Fine
Tuning
(formerly Fine
Tuning - see
MMA RP-022)
02H = 2 Channel
Coarse Tuning
(formerly
Coarse Tuning
- see MMA
RP-022)
03H = 3 Tuning
Program
Change
04H = 4 Tuning Bank
Select
05H = 5 Modulation
Depth Range
(see MMA
General MIDI
Level 2
Specification)
Page-67
Function
MSB = +/- semitones
Resolution 100/8192 cents
00H 00H = -100 cents
7FH 7FH = +100 cents
Resolution 100 cents
Tuning Program Number
Tuning Bank Number
For GM2, defined in GM2 Specification.
For other systems, defined by
Data Entry Value
LSB =+/--cents
40H 00H = A440
Only MSB used
00H = -6400 cents
40H = A440
7FH = +6300 cents
manufacturer
October 20, 2004