NOTE: The 'DIP Switch is set to' field reflects the current DIP Switch setting. Care must be taken
when choosing a new 'Configuration Number'. If a 'Configuration Number' already contains settings,
writing to the same 'Configuration Number' will overwrite this information.
A window should appear to confirm that the contents were written.
Figure 42: Confirms configuration written to CMK from CMKConfig software.
2. Options Menu
•
MIDI I/O Setup – This function sets the MIDI input and output ports on your PC.
Icon:
Keyboard shortcut: Ctrl+M
_________________________________________________________________________________________________________
CMK-1 Manual (Issue-1)
Figure 41: Successful Software connection to the CMK
Figure 43: MIDI Input Output Setup window
Page-45
October 20, 2004