CMK SOFTWARE CONFIGURATION
Introduction
Users with access to a personal computer running Windows
(contained in the compact disc) to program additional configurations. These configuration files describe the features
of each keyboard such as output MIDI channel and the function of each piston. The software allows users to create
configuration files, change existing configuration files, and use existing configuration files.
Software Installation
The CMK includes a compact disc (CD) with software allowing users to create custom configurations. To use the
software, the CMK must be connected to a personal computer running Windows operating system software
(Windows 98, 2000, XP). The CMK must be connected to a computer using MIDI. If a MIDI port is not available
on your computer, commercial MIDI adapters for the game port, USB port, and parallel port may be used. When the
installation CD is placed in the optical drive of your computer (CD drive), the software installation wizard should
automatically run. If however, the software installation wizard does not automatically run follow the steps below:
1. Open the 'Start' menu and click on 'Run'.
2. Click on 'Browse' and select the optical drive (CD drive) from the 'Look in:' drop down menu.
3. Locate and click on a file named 'CMK_Setup.exe'.
4. Follow the instructions in the software installation wizard (screen captures are shown below).
1
Windows is a registered Trademark of the Microsoft Corporation.
_________________________________________________________________________________________________________
CMK-1 Manual (Issue-1)
CLASSIC MIDI KEYBOARD
(PC Windows
Page-32
CMK-1
TM
USERS ONLY)
TM 1
operating system can use the 'CMKConfig' software
October 20, 2004