Classic Organ Works CMK-1 User Manual page 31

Table 11: Piston programming functions (cont'd)
Name
VELOCITY
SENSING
ON/OFF
ANALOG
INPUT –
VOLUME
SETUP
DISABLING
ANALOG
INPUT –
VOLUME
ANALOG
INPUT –
EXPRESSION
SETUP
DISABLING
ANALOG
INPUT -
EXPRESSION
_________________________________________________________________________________________________________
CMK-1 Manual (Issue-1)
Steps
st
Hold 1 piston from
th
the left (SET) and 4
black key from the
left (G#1) to turn off
velocity sensing.
st
Hold 1 piston (SET)
th
and 5 black key
from the left (A#1) to
turn on velocity
sensing. Afterwards,
release the SET
piston.
st
Hold the 1 piston
from the left (SET)
th
and the 6 black key produce General MIDI volume information on channels
from the left (C#2).
Then select any analog input will produce MIDI messages transmitted on
st
combination of the 1 these three channels. Please note that the crescendo input
16 white keys from does not require setup because it produces messages for
the left (C1 to D3).
Afterwards, release
the SET piston.
st
Hold the 1 piston MIDI messages describing volume information from the
from the left (SET)
th
and the 6 black key
from the left (C#2).
Afterwards, release
the SET piston.
st
Hold the 1 piston Sets the output MIDI channels for the expression analog
from the left (SET)
th
and the 7 black key
from the left (D#2).
Then select any
st
combination of the 1 transmitted on these three channels. Please note that the
16 white keys from
the left (C1 to D3).
Afterwards, release
the SET piston.
st
Hold the 1 piston MIDI messages describing expression information from
from the left (SET)
th
and the 7 black key
from the left (D#2).
Afterwards, release
the SET piston.
Page-31
Function
Velocity sensing produces a different volume level
corresponding to the force with which a key is pressed.
To conform to traditional organ consoles which are not
velocity sensitive, the CMK permits users to disable
velocity sensing in the keyboard.
Sets the output MIDI channels for the volume analog
input. For example, if we configure the analog input to
1, 3 and 5, then all MIDI events originating from that
the Ahlborn Archive modules.
analog input will not be transmitted on any MIDI
channel.
input. For example, if we configure the analog input to
produce General MIDI expression information on
channels 1, 3 and 5, then all MIDI events originating
from that analog input will produce MIDI messages
crescendo input does not require setup because it
produces messages for the Ahlborn Archive modules.
the analog input will not be transmitted on any MIDI
channel.
October 20, 2004